About Us

Welcome!

Hi there! We are the Curren Family. We traveled full time in our Airstream from 2013-2017 and now split our time between our small condo in Teton Valley, ID and the road.

As avid, outdoor, travel and adventure enthusiasts we are here to provide tips, advice, and inspiration to help you develop healthier and stronger family relationships.

Follow Us

Email Subscribe

Wandering Wifi

During our first 6 month round of travel, I managed to keep connected with just a loose Verizon Hotspot, with service through Millinicom. When I say ‘loose’ I literally mean the hotspot was usually sitting on the table. I also had a Wilson SleekV 4G cradle booster, and a tiny magnetic antenna that I could mount in the window. I only pulled out and used the booster when I had a low signal.

After meeting Kyle and seeing his sweet setup, I decided it was time for an upgrade. Now that it is all installed, it’s time for a report.

Gear List

  • Pantech hotspot
  • Wilson Sleek-V booster cradle
  • PepWave SoHo (with DC power adapter)
  • 2 Roof mounted antennas
  • DC power distribution

Outside Antennas

IMG_20140610_113947I wanted to mount the antennas on the roof, both to avoid the futz factor of an internal antenna, and to help the signal escape this faraday cage I call home. Kyle had his antennas mounted to his solar panels, but I didn’t have those yet, so I improvised. Using a piece of 1/4 by 2.5 in aluminum bar from the hardware store, I cut a horizontal piece and two ‘feet’ The feet were attached to the roof with outdoor adhesive tape, and the horizontal bar attached to the two feet and the vertical bar supporting the TV antenna. The new antennas were then screwed to this horizontal bar. Bolts with threadlocker were used on all connections. Using adhesive tape and the existing support for the TV antenna allowed a secure connection without drilling a mounting hole in the Airstream.

Cable Run

IMG_20140609_202953

Running the antenna cables took some thought. I ended up running them along the roof and down the vent above the fridge. To access the small area behind the fridge, I (with the help of my Father-in-law) removed the fridge. Removing the fridge mostly involves a hunt for the screws and bolts holding it in place. After those were removed, it slid right out. We set it on some cardboard on the Airstream floor while we worked inside it’s enclosure.

We were able to remove a thin wooden panel, cut a small hole in the mesh covering the fridge vent, and run the cable down the wall and out the existing hole behind the TV.  The antenna cables are 10 feet long, giving me just enough room to make it work.

Then, of course, we put the fridge back into place and reconnected it to the AC, DC, and propane. And it still worked! We ended up using some foil tape on hand to seal the back panel to the side walls, so you might want that handy if you attempt this stunt yourself.
Gimme The Power!

We now had some additional power requirements behind the TV. I found a DC splitter that also had USB ports in place, and this worked well. We have a 12V connector for the PepWave, and USB power connections for the booster cradle, and our two cellphones which sit in brackets to charge while we sleep.

The Pantech hotspot connects to the PepWave via USB, which provides both power and a network connection.

Industrial Strength Velcro

With everything hooked up and working, it was time to secure it to the wall. I used industrial strength velcro for this job, and it has worked very well. The velcro allows for things to be moved or adjusted, and has held securely while towing.

Amazingly, all this gear fits in the space behind the TV, making it nearly invisible unless you look for it.

Wandering Wifi - How We Get Internet While Traveling

And that, folks, is the wall of awesome.

6 comments
Add a comment...

Your email is never published or shared. Required fields are marked *

  • I’m using a 24dbi parabolic antenna and an Alpha usb wifi adapter with great success in RV parks. I don’t even use the park wifi, just mount the antenna on the roof or a tree, find an open network, and skip using an overcrowded network in the park.ReplyCancel

  • Wayne Mahon

    Love your blog! I was wondering what model antennae you are using?ReplyCancel

  • We have only been at Airstreaming for 18 months, but have been loving it! We just returned from 6 weeks in Florida, and last Srping we spent 7 weeks in the West. Our blog shares pictures and some writing about our travels.

    I loved your article on WIFI, and had a question. Does the set up you installed simply strengthen the signal offered by an RV park, or does it connect to the internet without RV park wifi?

    Best Regards,ReplyCancel

    • Sam

      Both, and….. neither. The PepWave device creates it’s own Wifi Hotspot, and it can connect to the internet via 3 methods. Most common is via a USB connection to a Verizon Mifi device. Second is a connection to another Wifi Access Point, such as campground wifi. Third is via a Cat5 cable plugged into the device. (We’ve never used this, but it is possible).

      so the device doesn’t connect to the internet itself, but can use any of the methods described. Does that make sense?ReplyCancel

  • OK, I’d love to pick your brain about your internet setup.

    We just bought an RV and my wife directed me to your blog. We’re taking off in a month and I plan on working on the road — and next to being able to concentrate in such tight quarters with the kids, my biggest fear is making sure internet and electricity keep humming.

    I bought a Wifi Ranger antenna and Go2 router and signed up for the biggest Verizon data plan I could afford (20gb) with a Jetpack myfi hotspot and a Wilson / weboost signal booster.

    I don’t know if I’m just throwing money at a problem I don’t understand.

    I’ll have a challenge figuring out how to mount and wire it up but now I’m worried about how to power it all. We only have two 6 volt batteries in series and a 10 watt trickle charge solar panel. We also have an Onan 7000 watt generator but can’t run that 8 hours a day.

    How do you manage and what can you recommend?ReplyCancel

Partners & Affiliates

We've tried and tested many companies and only bring you the best! By clicking on our links we receive a small kickback and it doesn't cost you anything. Thanks so much for your support!

©2019 Peak Ventures LLC. All rights reserved. Republication in part or entirety requires a link back to the original post AND permission from the author. 

Occasionally we will partner with a company or brand and/or provide affiliate links on our site. All opinions are always our own and generally we've vetted things pretty well before presenting them to our readers. 

We are not professionals and although we provide trip reports or adventure ideas please research and do your own due diligence before embarking on any trip.